Experimental investigation on a cabin-suspended catamaran in terms of motion reduction and wave energy harvesting by means of a semi-active motion control system     

《Applied Ocean Research》2019

A novel concept catamaran equipped with a suspended cabin, named Wave Harmonizer Type 4 (WHzer-4), is proposed and evaluated. The mass-spring-mass system is constructed by mounting four sets of suspensions in-between the cabin and the twin-hull. Two sets of dual motor/generators (M/Gs) are attached on the center beam of the cabin's deck fore and aft. Each shaft-end of the dual M/Gs is connected to the twin-hull through a rack-pinion gear unit. In this way the vertical relative motion between the cabin and the twin-hull can be transferred into the rotational motion of the M/Gs, and vice versa. A semi-active motion control system, which contains a proportional-integral (PI) controller, is designed and applied to each of the dual M/Gs for the aim of absorbing wave energy under the condition of suppressing the local vertical velocity of the cabin as much as possible. A 1/5 scale model ship with a length of 1.6 m is built, and a forced-oscillation bench test is implemented to validate the performance of the control system. Then, a series of towing tank tests is carried out in regular head waves. The heave and pitch responses of the cabin, those of the twin-hull and the corresponding wave energy capture width ratio (CWR) at five control scenarios and two reference scenarios are investigated. Discussion on the results of the tank test shows that the motion reduction of the cabin and the wave energy harvesting can be achieved simultaneously at a few wave conditions. However, at other conditions, although noticeable amount of wave energy is harvested, motion reduction of the heave and pitch of the cabin could not be obtained at the same time. It is suggested that varying the gain settings of the PI controllers according to the location of the controllers may improve the effectiveness of the proposed control system.  相似文献   

Adsorption Mechanism and Kinetic Characterization of Bituminous Coal under High Temperatures and Pressures in the Linxing-Shenfu Area     

TAO Chuanqi  WANG Yanbin  LI Yong  NI Xiaoming  GAO Xiangdong 《《地质学报》英文版》2020,94(2):399-408

The majority of coalbed methane(CBM) in coal reservoirs is in adsorption states in coal matrix pores. To reveal the adsorption behavior of bituminous coal under high-temperature and high-pressure conditions and to discuss the microscopic control mechanism affecting the adsorption characteristics, isothermal adsorption experiments under hightemperature and high-pressure conditions, low-temperature liquid nitrogen adsorption-desorption experiments and CO2 adsorption experiments were performed on coal samples. Results show that the adsorption capacity of coal is comprehensively controlled by the maximum vitrinite reflectance(Ro, max), as well as temperature and pressure conditions. As the vitrinite reflectance increases, the adsorption capacity of coal increases. At low pressures, the pressure has a significant effect on the positive effect of adsorption, but the effect of temperature is relatively weak. As the pressure increases, the effect of temperature on the negative effect of adsorption gradually becomes apparent, and the influence of pressure gradually decreases. Considering pore volumes of pores with diameters of 1.7-100 nm, the peak volume of pores with diameters 10-100 nm is higher than that from pores with diameters 1.7-10 nm, especially for pores with diameters of 40-60 nm, indicating that pores with diameters of 10-100 nm are the main contributors to the pore volume. The pore specific surface area shows multiple peaks, and the peak value appears for pore diameters of 2-3 nm, indicating that this pore diameter is the main contributor to the specific surface area. For pore diameters of 0.489-1.083 nm, the pore size distribution is bimodal, with peak values at 0.56-0.62 nm and 0.82-0.88 nm. The adsorption capability of the coal reservoir depends on the development degree of the supermicroporous specific surface area, because the supermicroporous pores are the main contributors to the specific pore area. Additionally, the adsorption space increases as the adsorption equilibrium pressure increases. Under the same pressure, as the maximum vitrinite reflectance increases, the adsorption space increases. In addition, the cumulative reduction in the surface free energy increases as the maximum vitrinite reflectance increases. Furthermore, as the pressure increases, the surface free energy of each pressure point gradually decreases, indicating that as the pressure increases, it is increasingly difficult to adsorb methane molecules.  相似文献   

探秘“能源新星”——干热岩          下载免费PDF全文

王文  吴纪修  施山山  李小洋 《探矿工程》2020,47(3):88-93

干热岩是近些年逐渐发展起来的清洁能源，指埋藏于地球表面3000 m以深，不含或含少量水或蒸汽等流体，温度在180 ℃以上且渗透率极低的岩体。对干热岩的应用主要是建立增强型地热系统进行发电。目前对干热岩的研究尚处于起步阶段,干热岩的热源、热储、形成机理、埋藏机制等都未形成完整的理论体系，干热岩的开发过程也面临诸如储层改造、高温钻探以及随钻监测等一系列的技术“瓶颈”。干热岩资源储量大，开发利用过程低碳环保、节能高效，是国际社会公认的优质清洁能源，但是干热岩研究程度低，开发难度大，需要不断的知识积累和技术积累。本文从科普的角度列举了干热岩的相关研究现状及存在的问题，以期能让更多的人对这一“能源新星”加深了解。  相似文献   

Geographies of energy transition: the case of high-performing commercial office space in the central business districts of Sydney and Melbourne,Australia     

Chantel Carr  Robyn Dowling 《The Australian geographer》2019,50(1):29-48

As a signatory to the Paris Climate Agreement, Australia committed to reduce emissions significantly by 2030. In a country highly urbanised and dependent on fossil fuels as its primary energy source, one key avenue for meeting these commitments is energy transition in the built environment. Australia has emerged as a leader in the design and construction of high-performance buildings in the premium commercial office sector. In this paper, we address a significant gap in understanding the diverse mechanisms through which building energy transition is being constituted in this sector, focusing on Sydney and Melbourne. In the absence of substantive publicly available data, we draw on mixed methods comprising a database developed around high-performing CBD office buildings and qualitative interviews with a range of sectoral stakeholders. We characterise the building stock in each city, and document five trends constituting energy transitions. We demonstrate that building energy transitions are not only shaped purposefully by dominant governance regimes but also by opportunistic responses to specific material and commercial conditions and legacies in each city. Thus the urban built environment affords significant opportunity for energy transitions, but pathways towards such transitions are necessarily multiple and ultimately shaped by material as well as institutional geographies.  相似文献   

渭河盆地地温场分布规律及其控制因素     

任战利  刘润川  任文波  祁凯  杨桂林  崔军平  杨鹏  张园园 《地质学报》2020,94(7):1938-1949

本文以渭河盆地地温场为研究对象,在收集补充新地热井资料及分析测试样品的基础上,通过盆地深部结构、构造特征、地温场特征、热储层特征、地热资源量等分析,建立了盆地不同岩性岩石热导率与深度关系图版,确定了盆地地温场变化规律及地热田控制因素,提出了渭河盆地地热田形成模式。评价了盆地地热资源有利区,为盆地后续的开发利用提供了理论支持。研究认为渭河盆地热地温梯度分布在2.34～5.85℃/100m之间,平均地温梯度为3.50℃/100m,代表性大地热流68.33mw/m~2,地温梯度及不同深度地层温度具有东高西低、南高北低的特点。热导率总体上具有随深度的增加,逐渐增大的规律,热导率随深度增加主要受压实程度增强控制。相同深度条件下泥岩热导率最低,砂岩热导率居中、白云岩热导率最高。渭河盆地主要为层状地热田,盆地内地热通过热传导及热对流两种方式进行传递,以热传导为主。渭河盆地地热资源丰富,热储层可分为三种类型:①新生界砂岩孔隙型;②下古生界碳酸盐岩岩溶型;③断裂型。渭河盆地地热资源有利区主要分布于西安凹陷、固市凹陷。盆地地温场及地热田分布与莫霍面、软流圈上隆、岩石圈厚度减薄的深部背景密切相关,主要受地热传导和深大断裂热对流控制,是岩石圈深部结构、盆地构造、基底岩性、储盖组合等多因素共同作用下形成的。最后结合当前渭河盆地地热资源开发利用现状及存在问题,提出了地热开发利用建议。  相似文献   

A comparative study of energy performance of hydrostatic seafloor sediment samplers and a new high-efficiency sampler     

《Applied Ocean Research》2019

The hydrostatic energy of high-pressure seawater is a renewable and green energy source for ocean exploration and have been used to replace underwater electrical energy transmission through the cable and underwater battery pack to power seafloor equipment. The advantage of the energy supply method is the cost-effective and the robustness. In the paper, the energy performance of the existing hydrostatic seafloor sediment samplers powered by seawater hydrostatic energy are modelled and analyzed and compared. In view of the common shortcoming of existing technology, a novel hydrostatic seafloor sediment sampler is proposed. The model of energy conversion of the new sampler is built, and its energy performance is obtained. The analysis results indicate that the energy conversion efficiency of the novel sediment sampler is much higher than the existing ones, which means that the new sampler can collect much longer sample with the limited amount of hydrostatic energy. The seawater hydrostatic energy conversion system of the new sampler can also be used to power other seafloor equipment.  相似文献   

基于热力图数据的杭州商业综合体活力影响因素分析     

张小东  韩昊英  舒贤帆 《地球信息科学学报》2019,21(11):1745-1754

为了防止商业综合体建设过剩,形成商业综合体之间的恶性竞争。本文基于微信易出行插件里面的城市热力图数据,以杭州市5个商业综合体为例,获取可以量化的热力值数据,对不同类型的商业综合体活力影响因素进行对比分析研究。研究发现：① 城市商业综合体布局密度、周边用地用途、销售模式、内部功能布局以及内部空间活力5个要素对商业综合体活力的影响最明显;② 商业综合体的高密度布局对其活力存在抑制作用,通过对比各个服务半径内的商业综合体的活力变化,发现商业综合体合理的服务半径应该大于1.0 km。商业综合体周边的居住用地、广场和公园用地对其活力具有增强作用,办公用地对商业综合体活力的影响较弱;③ 针对不同消费对象制定的不同销售模式,也会对商业综合体活力变化产生显著影响;④ 在公共活动空间相对缺乏的区域内,以零售为主且兼具城市公共活动空间的商业综合体比以主力店为主的商业综合体的活力更高,空间利用率越高的商业综合体活力也越高,商业综合体承担部分城市公共活动空间的职能对商业综合体的活力起到了提升作用。  相似文献   

基于钻进状态监测的智能工况识别          下载免费PDF全文

范海鹏  吴敏  曹卫华  赖旭芝  陈略峰  陆承达 《探矿工程》2020,47(4):106-113

钻进过程状态监测旨在实时描述钻进工况，判断运行性能优劣程度进行非优追溯，及时指导司钻人员调整作业操作,保证钻进过程安全、高效、稳定开展。钻进工况是钻进系统运行状态的反映，因此开展面向状态监测技术的钻进工况识别研究具有重要的理论和应用价值。本文针对钻进工况识别问题，基于状态监测数据，建立基于支持向量机的钻进工况识别模型，对钻进工况进行识别。综合工况识别结果，对钻进效率进行评估，并对影响钻进效率的因素进行讨论，寻找提升钻进效率的手段。最后，采用钻进现场实钻数据进行仿真实验,验证所提方法的可行性和有效性。  相似文献   

多能互补海洋能集成发电技术研究综述     

王世明  李泽宇  于涛  马晨倍 《海洋通报》2019,38(3)

介绍了国内外基于风能、太阳能、波浪能和潮流能等海上可再生能源进行多能互补集成发电的研究发展情况,从不同技术研究侧重点、不同装置机理差异性和多能互补集成发电方式等方面进行了概括和综述,对已有设备和理论研究等进行了对比,评述了目前海洋多能互补集成发电技术研究中存在的主要问题以及未来的研究发展趋势,指出未来海洋能源集成发电需在离岸化、新材料、大型化和阵列布局等方面进行技术研究和攻关。  相似文献   

Cotton canopy reflectance under variable solar zenith angles: Implications of use in evapotranspiration models     

Christopher M. U. Neale  Maria P. Gonzalez-Dugo  Angelica Serrano-Perez  Isidro Campos  Luciano Mateos 《水文研究》2021,35(6):e14162

Evapotranspiration (ET) is an important parameter in hydrologic processes and modelling. In agricultural watersheds with competing uses of fresh water including irrigated agriculture, estimating crop evapotranspiration (ET_c) accurately is critical for improving irrigation system and basin water management. The use of remote sensing-based basal crop coefficients is becoming a common method for estimating crop evapotranspiration for multiple crops over large areas. The Normalized Difference Vegetation Index (NDVI) and the Soil Adjusted Vegetation Index (SAVI), based on reflectance in the red and near-infrared bands, are commonly used for this purpose. In this paper, we examine the effects of row crop orientation and soil background darkening due to shading and soil surface wetness on these two vegetation indices through modelling, coupled with a field experiment where canopy reflectance of a cotton crop at different solar zenith angles, was measured with a portable radiometer. The results show that the NDVI is significantly more affected than the SAVI by background shading and soil surface wetness, especially in north–south oriented rows at higher latitudes and could lead to a potential overestimation of crop evapotranspiration and irrigation water demand if used for basal crop coefficient estimation. Relationships between the analysed vegetation indices and canopy biophysical parameters such as crop height, fraction of cover and leaf area index also were developed for both indices.  相似文献